PS36 - fast container ship catamaran
Sectional demountable 40ft container ship catamaran
factory, Sumy price offer
Please ask for full specification
LOA: 11 m / 36 ft
LWL: 10,82 m / 35,5 ft
Beam: 6,2 m / 20,40 ft
Bridgedeck clearance: 80 cm / 2,63 ft
Draft: 0,85 - 2 m / 2,79 - 6,6 ft
Mast height: 15 m / 49 ft
Mainsail: 42 sqm / 452 sq ft
Jib: 18 sqm / 194 sq ft
Code 0: 46 sqm / 495 sq ft
Gennaker: custom made
Berths: 6 – 8
Water: 2 x 160 l / 35 UK gallon
Engine: 2 x El. Oceanvolt Set engine
Dual 6kW Saildrive 6 motors, with a combined power of 12kW.
 Rpm, 2200.
 With a 1.93:1 reduction ratio the maximum shaft Rpm is 1140.
Motor system includes: motors, saildrives, motor controllers, control levers, CAN-cables and displays.
Based on the data input, hull speed of your boat is 8.1 knots and the recommended cruising speed is
5.6 knots
Total weight: 3600 Kg
Payload: 1400 Kg
01 Standard equipment
Construction
Hulls & Deck
Made with DUFLEX® DIVINYCELL COMPOSITE FOAM PANELS technology
UNSINKABLE with Airex foam core together with bow and aft collision watertight compartment
Hull and deck are bonded with epoxy glass in one solid hull
Structural bulheads laminated to reinforce overall hull construction
Stress areas (where winches and major deck fittings are fixed) reinforced by massive glass epoxy
NO gel-coat to safe weight. Whole boat is varnished in standard RAL 9003 (any other color is possible)
Main beam made of epoxy carbon sandwich
Water tanks 2x200 L inside main beam, inspection hatches
carbon fore crossbeam + "V" stable carbon bowsprit
Rear crossbeam made from aluminium
Cockpit deck
Composite carbon-epoxy sandwich floor, antislip surface by International Paints
Made in three sections for ease of transport

Deck equipment
Delta Lewmar anchor bow roller, manually operated Rope/Chain Windlass
6 st/steel stanchions with Lifelines
Entrance flush hatches 950x700mm, Grey acrylic
Deck hatches, portlights, hatches, escape hatches in grey acrylic
Hull side-window strips are custom made in grey acrylic
Trampoline Black or Blue Polypropylene Mesh 14% Openness hammock floor netting
Helm seat for comfortable steering
Cockpit
Pedestal for B&G instruments and winches on consoles x 2 pcs
Two flexible bags for sheets and ratchets. Well ventilated
Double or single lever engine control at starboard
Recessed engine controls panels on each side
Hidden sliding stainless steel Bathing Ladder on each hull
Instruments
Offshore compass on each hull
Mast
Performance non-rotating silver-anodized aluminium mast
Double diamond with spreaders in aluminium
Mast step fixed to the main carbon beam
Stainless steel fractional stays
Stainless steel standing rig and headstay
Facnor single-line drum furler for headstay
Facnor endless-line drum furler for Gennaker and Code 0
Pad eyes from both sides of mast (4x) for reefs
5 stoppers for main halyard, boom topping lift, halyards for Jib, Staysail, Code 0 or Gennaker
Antal Race Winch XT 30 - 2 SPEED Antal 2x