Hunton RS43
Southampton, United Kingdomon the market since 3 days
Compare offers for this boat
Price on request
MP
Martin Payne Marine
Is this your listing? Claim listing with Yatzo PRO or report it.
About
Stop everything you are doing right now and find yourself a way to own this absolutely fabulous Hunton RS43!
Rafa is the very first Hunton RS43 to get a complete restoration with full upgrades of electronics, systems and additions to her original specification
Just take a look in detail at the full works schedule at the end of this text!!!
You will read how Rafa was completely stripped out, had a full metallic paint spray in charcoal grey (including under the waterline) before being reassembled with pretty much new everything from new outdrives to covers.
From what I read, even in 2024 still nothing can match the Hunton RS43 for luxury, handling, performance and economy. Yes economy!
Top speed 48 knotsCruising speed up to 38 knotsApprox 70 LPH at 35 knots
The Hunton RS43 deep Vee hull gives you a fast, soft, shore footed ride and is capable of the tightest of turns even at high speed, all a legacy of her hull design developed by Jeff Hunton over years of Offshore Powerboat Racing.
Below the Hunton RS43 has four berths in two separate cabins, large saloon, heads and shower.
In the cockpit there is a large sun bed at the rear, spacious seating curving around the dining table and wet bar. There is a double helm seat with drop down bolsters and another sunbed to the left.
Rafa has been dry berthed and covered since her restoration and is presented as new, turn key ready to go for the summer.
Please do not hesitate in contacting me if you have any questions.
All works carried out by JMP marine and engineers and project managers, together with Desty marine and other specialist sub contractors who are experienced in Hunton Boat construction ie Jon Elderfield
Hull and superstructure.
Removal of all stainless steel work, clean, refurbish and straighten any dents etc.Remove original teak from cockpit and saloonSand and remove antifouling complete, repair any dents and scuffs.Sand and Repaint Hull and Superstructure etc, including engine bay and locker compartment (with gel wash).Refit stainless and re seal all.Renew all teak throughout boat with new artificial teak.Replace external window hatches in structure with new and seal same.Replace windlass and fit additional length of stainless steel chain.
EquipmentFit new bow and stern thruster to boat and ancillary controlsReplace all batteries both engine and domestic with new gel batteries and leads.Replace battery chargerService and overhaul panda generator.Replace radar and plotter with new touch screen units.Remove engines, strip and rebuild, fit new short engine to port side.
Engines have been chipped to increase horsepower to 390bhp each by JMP.
Strip and rebuild all superchargers and alternators
Remove and replace leg and drive units with new Volvo units.
Fit new stainless steel propellers
Service and refit engines and ancillaries etc.
Strip and overhaul trim tabs and controlsReplace all switchgear in cockpit with new, remake all wiring joints throughout boat and test and ensure all is working as it should
Fit new LCD TV in cockpit, and ensure Fusion stereo and speakers.
Replace all lighting with new LED lighting
Fit new underwater LED hull lighting to rear and sides of boat
Fit new venetian blinds to windowsReplace all upholstery within boat complete (incl beds, bench seating, headboards, hull coverings, headlining's, cockpit seating and sunbathing pads, using a mixture of Silvertex marine fabric internally and externally.Replace carpets with new hand bound and edged stitched carpets to original templates.
Vinyl wrap all internal joinery, overhaul and leave in good working order, cabinetry locks and handles etc
Replace kitchen mixer tap, new WC and WHB tap in heads
Replace all bilge pumps and overhaul black water tank and pumps etc
Fit new external shower mixer tap to stern of boat, and also tap to external sink
Fit new tonneau coverFit new camper style cockpit coverFit new winter all over cover
Supply new black fenders and ropes
Overhaul and service life raft
Purchase and fit during winter dehumidifier.
New external metered electric shore power cable (compatible with MDL marinas)4 keys for boat engines(2 for each engine).
Construction
Hull
Deck
Helm
Cockpit
Saloon
Galley
Forward (Main) Cabin
Aft Cabin
Toilet/Shower Room
Engine Compartment and Ancillaries
Extras
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
Rafa is the very first Hunton RS43 to get a complete restoration with full upgrades of electronics, systems and additions to her original specification
Just take a look in detail at the full works schedule at the end of this text!!!
You will read how Rafa was completely stripped out, had a full metallic paint spray in charcoal grey (including under the waterline) before being reassembled with pretty much new everything from new outdrives to covers.
From what I read, even in 2024 still nothing can match the Hunton RS43 for luxury, handling, performance and economy. Yes economy!
Top speed 48 knotsCruising speed up to 38 knotsApprox 70 LPH at 35 knots
The Hunton RS43 deep Vee hull gives you a fast, soft, shore footed ride and is capable of the tightest of turns even at high speed, all a legacy of her hull design developed by Jeff Hunton over years of Offshore Powerboat Racing.
Below the Hunton RS43 has four berths in two separate cabins, large saloon, heads and shower.
In the cockpit there is a large sun bed at the rear, spacious seating curving around the dining table and wet bar. There is a double helm seat with drop down bolsters and another sunbed to the left.
Rafa has been dry berthed and covered since her restoration and is presented as new, turn key ready to go for the summer.
Please do not hesitate in contacting me if you have any questions.
All works carried out by JMP marine and engineers and project managers, together with Desty marine and other specialist sub contractors who are experienced in Hunton Boat construction ie Jon Elderfield
Hull and superstructure.
Removal of all stainless steel work, clean, refurbish and straighten any dents etc.Remove original teak from cockpit and saloonSand and remove antifouling complete, repair any dents and scuffs.Sand and Repaint Hull and Superstructure etc, including engine bay and locker compartment (with gel wash).Refit stainless and re seal all.Renew all teak throughout boat with new artificial teak.Replace external window hatches in structure with new and seal same.Replace windlass and fit additional length of stainless steel chain.
EquipmentFit new bow and stern thruster to boat and ancillary controlsReplace all batteries both engine and domestic with new gel batteries and leads.Replace battery chargerService and overhaul panda generator.Replace radar and plotter with new touch screen units.Remove engines, strip and rebuild, fit new short engine to port side.
Engines have been chipped to increase horsepower to 390bhp each by JMP.
Strip and rebuild all superchargers and alternators
Remove and replace leg and drive units with new Volvo units.
Fit new stainless steel propellers
Service and refit engines and ancillaries etc.
Strip and overhaul trim tabs and controlsReplace all switchgear in cockpit with new, remake all wiring joints throughout boat and test and ensure all is working as it should
Fit new LCD TV in cockpit, and ensure Fusion stereo and speakers.
Replace all lighting with new LED lighting
Fit new underwater LED hull lighting to rear and sides of boat
Fit new venetian blinds to windowsReplace all upholstery within boat complete (incl beds, bench seating, headboards, hull coverings, headlining's, cockpit seating and sunbathing pads, using a mixture of Silvertex marine fabric internally and externally.Replace carpets with new hand bound and edged stitched carpets to original templates.
Vinyl wrap all internal joinery, overhaul and leave in good working order, cabinetry locks and handles etc
Replace kitchen mixer tap, new WC and WHB tap in heads
Replace all bilge pumps and overhaul black water tank and pumps etc
Fit new external shower mixer tap to stern of boat, and also tap to external sink
Fit new tonneau coverFit new camper style cockpit coverFit new winter all over cover
Supply new black fenders and ropes
Overhaul and service life raft
Purchase and fit during winter dehumidifier.
New external metered electric shore power cable (compatible with MDL marinas)4 keys for boat engines(2 for each engine).
Construction
Hull
Deck
Helm
Cockpit
Saloon
Galley
Forward (Main) Cabin
Aft Cabin
Toilet/Shower Room
Engine Compartment and Ancillaries
Extras
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
