1925 Pettersson Pettersson Motor Launch Boat for Sale in Hampshire
Farnborough, United Kingdomon the market since 4 days
Price on request
WS
Wooden Ships Yacht Brokers
Is this your listing? Claim listing with Yatzo PRO or report it.
About
Wooden Ships Comments on this Pettersson Motor Launch
Classic motor launch designed and built by C.G. Pettersson of Sweden in 1925.
A stunning varnished mahogany launch with typical Pettersson lines, refitted by Clare Lallows yard in Cowes to a very high standard. Refurbished hull with a new deck, all new cockpit fit out, new Beta engine and new wiring. The restoration was completed in 2012 and she has been stored ashore inside for much of the time since, only being used on sporadic occasions. Commissioned and launched for the summer of 2026.
Her Beta Marine 56hp engine gives her a cruising speed of 11 knots (14 knots max), a speed which covers the ground at a very acceptable rate and makes her a practical and useable run about.
These launches are very hard to come by in the UK so finding a Petterson launch in such remarkable condition represents an excellent opportunity to acquire a stand out motor launch of excellent pedigree.
2025 survey available.
Length on Deck: 25’
Beam: 6’2”
Draft: 2’9”
Construction
Hull
Carvel planked in tight seamed mahogany fastened to galvanised steel angle frames fastened with galvanised bolts. 2 steamed intermediate timbers between the frames fastened with copper rivets. Many of the rivets replaced along with some new oak timbers.
Sawn oak floors across the centreline. A couple of the galvanised frames have galvanised plate floors.
Decks and Cockpit
Straight laid teak deck planks on fore and aft decks with varnished mahogany covering board and king plank.
Teak planking is epoxy bonded to the sub deck all laid over new oak deck beams.
Original chromed bronze deck fittings.
Open cockpit with teak laid sole boards. Varnished mahogany thwarts either side.
Central insulated engine box made of varnished mahogany with a laid teak lid.
Port side helm position with a varnished mahogany helm seat.
Centreline varnished mahogany doors into the forepeak area. This is fitted out for storage of fenders etc with varnished teak sole boards and mahogany slats on the side of the hull.
Superstructure
Varnished mahogany windscreen with chromed bronze bezels around the windows.
Machinery
Engine
Beta Marine V2403 56hp diesel engine.
Technodrive TMD260 twin disc gearbox to a centreline shaft and a 15” x 17” fixed 3 blade bronze propeller with a rope cutter.
Tank
TekTank plastic fuel tank in the aft locker.
Batteries and Electrics
2 x 72ah battery charged from the engine alternator.
240 volt battery charger with installed shore power system.
12 volt switch panel in forepeak with battery isolator switches.
Steering
Teleflex steering cable. Bronze rudder tube with a steel plate rudder.
Equipment
Full all over canvas cover in cream canvas with hoop supports
Mooring warps
Fenders
16kg stainless steel CQR anchor with chain and warp
Fortress anchor
Whale Gusher Titan manual bilge pump
Whale Orca 950 auto bilge pump
Rule auto bilge pump
Emergency tiller
Horse shoe life buoy
2 x 72ah 12 volt batteries
Installed 240 volt battery charger
Ensign and staff
Boat hook
Engine spares kit
This 1925 Pettersson Pettersson Motor Launch is listed for sale in Hampshire, England. With a 25ft layout, inboard engine setup and used condition, this boat is suited to buyers looking for power options in this location. View full details, photos and specifications for reference RB704239 on Rightboat.
Classic motor launch designed and built by C.G. Pettersson of Sweden in 1925.
A stunning varnished mahogany launch with typical Pettersson lines, refitted by Clare Lallows yard in Cowes to a very high standard. Refurbished hull with a new deck, all new cockpit fit out, new Beta engine and new wiring. The restoration was completed in 2012 and she has been stored ashore inside for much of the time since, only being used on sporadic occasions. Commissioned and launched for the summer of 2026.
Her Beta Marine 56hp engine gives her a cruising speed of 11 knots (14 knots max), a speed which covers the ground at a very acceptable rate and makes her a practical and useable run about.
These launches are very hard to come by in the UK so finding a Petterson launch in such remarkable condition represents an excellent opportunity to acquire a stand out motor launch of excellent pedigree.
2025 survey available.
Length on Deck: 25’
Beam: 6’2”
Draft: 2’9”
Construction
Hull
Carvel planked in tight seamed mahogany fastened to galvanised steel angle frames fastened with galvanised bolts. 2 steamed intermediate timbers between the frames fastened with copper rivets. Many of the rivets replaced along with some new oak timbers.
Sawn oak floors across the centreline. A couple of the galvanised frames have galvanised plate floors.
Decks and Cockpit
Straight laid teak deck planks on fore and aft decks with varnished mahogany covering board and king plank.
Teak planking is epoxy bonded to the sub deck all laid over new oak deck beams.
Original chromed bronze deck fittings.
Open cockpit with teak laid sole boards. Varnished mahogany thwarts either side.
Central insulated engine box made of varnished mahogany with a laid teak lid.
Port side helm position with a varnished mahogany helm seat.
Centreline varnished mahogany doors into the forepeak area. This is fitted out for storage of fenders etc with varnished teak sole boards and mahogany slats on the side of the hull.
Superstructure
Varnished mahogany windscreen with chromed bronze bezels around the windows.
Machinery
Engine
Beta Marine V2403 56hp diesel engine.
Technodrive TMD260 twin disc gearbox to a centreline shaft and a 15” x 17” fixed 3 blade bronze propeller with a rope cutter.
Tank
TekTank plastic fuel tank in the aft locker.
Batteries and Electrics
2 x 72ah battery charged from the engine alternator.
240 volt battery charger with installed shore power system.
12 volt switch panel in forepeak with battery isolator switches.
Steering
Teleflex steering cable. Bronze rudder tube with a steel plate rudder.
Equipment
Full all over canvas cover in cream canvas with hoop supports
Mooring warps
Fenders
16kg stainless steel CQR anchor with chain and warp
Fortress anchor
Whale Gusher Titan manual bilge pump
Whale Orca 950 auto bilge pump
Rule auto bilge pump
Emergency tiller
Horse shoe life buoy
2 x 72ah 12 volt batteries
Installed 240 volt battery charger
Ensign and staff
Boat hook
Engine spares kit
This 1925 Pettersson Pettersson Motor Launch is listed for sale in Hampshire, England. With a 25ft layout, inboard engine setup and used condition, this boat is suited to buyers looking for power options in this location. View full details, photos and specifications for reference RB704239 on Rightboat.
