Remarks: Tara is a 2003-built Beneteau 50, a Bruce Farr–designed cruising yacht offering a spacious four-cabin, four-heads layout well suited to family cruising in the Eastern Mediterranean. She has been drysailed at Cleopatra Marina, Preveza, for the past fifteen years and presents as a well-equipped, turn-key example of the model. Tara has benefited from a substantial programme of recent works, including a complete standing rigging replacement, renewal of all 21 skin fittings and seacocks, and an upgraded charging system — all completed in 2026. She is offered ready to cruise, with a comprehensive equipment list and no significant outstanding works beyond those noted under Known Defects. Highlights Listed below but included in Full Specs:
New standing rigging (2026) All 21 thru-hulls and ball valves renewed with TruDesign composite fittings (2026) Upgraded charging system — 140A alternator with serpentine belt and Balmar external regulator Four-cabin, four-heads layout Bow thruster Full Garmin electronics suite, including AIS, radar and chartplotter Recent engine service (September 2026) In-mast furling main with electric winches Spinnaker fitted with snuffer for short-handed use
BROKER'S REMARKS Tara presents as a well-cared-for example of the Beneteau 50, benefiting from a thorough maintenance programme under long-term ownership. The standing rigging, thru-hulls and charging system have all been renewed in 2026, giving the next owner confidence in the vessel's major systems. The four-cabin, four-heads layout is a genuinely practical arrangement for family cruising or entertaining guests, with each stateroom served by its own heads compartment. The cockpit and deck are set up for easy, short-handed handling, with electric winches, a bow thruster and a snuffer-equipped spinnaker. Having been drysailed and stored ashore for most of each year, Tara is in good order throughout and ready for the coming season.
Accommodation: ACCOMMODATION Tara offers a spacious four-cabin, four-heads layout, with all staterooms fitted as double or queen berths — a genuinely practical arrangement for family cruising, with no cabin required to share a heads compartment. Two of the four heads are plumbed to holding tanks. LAYOUT Four double/queen cabins, each with its own heads compartment (two fitted with holding tanks, two without). Chart table and saloon table both fitted. DOMESTIC The galley is equipped with an oven, grill, galley sink, cool box and refrigerator (freezer conversion possible [CHECK]). Water system is pressurised, with hot water via immersion/calorifier. Webasto diesel heating is fitted; air conditioning is not permanently installed, though a portable 4,000 BTU shore-power unit is available for use at the boatyard. Stereo, TV and DVD player fitted; no TV aerial or satellite TV. Toilets are manual flush. No water maker fitted.
Inventory: NAVIGATION
Chartplotter / GPS: Garmin 740 Radar: Garmin HD 18 AIS: Garmin AIS 600 Autopilot: Raymarine SmartPilot ST6000/ST7000 autopilot Wind instrument: Garmin GWind (wired), masthead wind indicator fitted Fish finder: Garmin Chirp VHF radio: Standard Horizon Compass: Plastimo, fitted at each helm station Deck instruments: Garmin GM10, connected to an NMEA 2000 backbone Barometer and clock: Brass
DECK
Decking: GRP Anchors: 30kg Bruce (primary) with 80m of 12mm chain; 20kg secondary anchor Windlass: Lofrans Falcon, electric Winches: 2 x Lewmar 66, 1 x Lewmar 40 (electric), 1 x Lewmar 40 Anchor locker: Forward Pushpit / pulpit Boarding ladder Cockpit table Cockpit lockers: 2 Cockpit/deck shower: Hot and cold
CANVAS
Sprayhood Bimini Winter cover Cockpit cushions, including forward cushions for sun lounging
TENDER
Dinghy: Naut-Tend 230 inflatable Outboard: Suzuki DF6, approx. 8 years old
MISCELLANEOUS
Warps: 10 Fenders: 10 Full set of docklines and 2 x 50m long lines for shore mooring Leather-wrapped steering wheels Bosun's chair and climbing harness Stand-up paddleboard (with carbon paddle) Spinnaker sheets fitted with Tylaska shackles Fully stocked galley — pots, pans, crockery, glassware, cutlery and serving trays Comprehensive tool kit, including ratchet set, hand tools, strap wrenches, jigsaw, handsaw, polishing equipment, spare head pumps and hole saws Spare Balmar 624 regulator and spare 140A alternator Spare macerator pump 12 x USB charging ports Fitted sheets, flat sheets, blankets and pillows for every cabin Games, books, guitar and sports equipment, including 6 sets of masks, snorkels and fins
EXTRA DETAILS
Currently ashore, Preveza, Greece Drysailed for the past 15 years All 21 skin-fitting thru-hulls and ball valves replaced with TruDesign composite fittings in 2026, together with upgraded sewage lines and premium head hose
KNOWN DEFECTS
Port aft heads plumbing is incomplete; parts are aboard and a plan is in place, estimated at approx. 4 hours' work to finish Outboard requires a carburettor service, including a needle valve replacement Engine-driven fridge unit leaks refrigerant when not in regular use Bow cabin vinyl wall covering has been removed; replacement material is aboard but not yet fitted Bow cabin heads pump leaks and requires replacement; three spare pumps are carried aboard Zincs will need replacement if the vessel is to be launched for any length of time Bottom paint (antifouling) will be required if the vessel is to be kept afloat rather than continuing to be drysailed Teak on the swim platform is worn Teak rail has split in three or four places around the cleats and will need replacing
KNOWN DAMAGE
Accident history: None Insurance claims: None
HISTORY Tara was purchased in Croatia as an ex-charter vessel and subsequently registered in Canada. She has since been developed into a private family cruising yacht, with the owners cruising aboard for 13 months before deciding to retain her rather than sell. In 2026, following a survey recommendation, the entire standing rigging was replaced — both forestays, both backstays and all shrouds — using Stay-Loc turnbuckles and swages, carried out by a rigging specialist in Lefkas. At the same time, the main and jib furlers were serviced and two halyards and the main topping lift were replaced. All 21 thru-hulls were replaced with TruDesign composite skin fittings and ball valves, rated to a 500lb side-load specification, together with new head hose and clamps. The electrical system has been upgraded with a stronger serpentine belt drive in place of the original Yanmar V-belt, paired with a 140A alternator and Balmar external regulator, allowing substantial battery charging within an hour of running the engine. Over the past 15 years the vessel has been drysailed from Cleopatra Marina, Preveza, averaging around 35 days afloat per year. Recent upgrades include replacement foam in the aft cabins, new sun pads and cockpit cushions, a gas barbecue, and a complete Garmin electronics suite (AIS, chartplotter, wind instruments, cockpit repeaters and radar) on an NMEA 2000 backbone. Sails are older but serviceable and have been regularly serviced by a sailmaker in Lefkas; the spinnaker has been fitted with a snuffer to allow short-handed use. The Yanmar engine has approximately 5,500 hours and has received regular oil and filter changes; it drives a straight shaft to a MaxProp feathering propeller, which reverses pitch to minimise prop-walk. Indicative power speeds: 1,500rpm ? 6.5 knots, 2,000rpm ? 7.2 knots, 2,500rpm ? 7.7 knots. The exhaust elbow has been upgraded to stainless steel, with the original retained as a spare. The primary anchor is a 30kg Bruce with 80m of oversize 12mm galvanised chain (chain replaced 2016).
SAFETY
Life raft, last serviced July 2022 Radar reflector Life jackets: 9 Fire extinguishers: 4 Fire blanket Flares: Carried [CHECK — expiry date not recorded on the form] Bilge pumps: 2 electric, plus manual Foghorn Search light
Mechanical: CONSTRUCTION
Builder: Beneteau, France Designer: Bruce Farr & Associates Year built: 2003 Hull material: GRP Deck material: GRP Hull colour: White Keel type: Fin Rudder type: spade Steering type: Wheel, twin aft helm positions Keel: — preventive epoxy treatment applied
Engine make: Yanmar 4JH3-HTE Engine type: Diesel inboard, single engine Engine year: 2003 Engine hours: Approx. 5,459 hours Service history: Last serviced September 2026 by the owner — oil, filters, antifreeze, transmission oil and secondary fuel filter Cooling: Fresh water cooled Fuel consumption: Approx. 4 litres/hour Drive type: Shaft drive Propeller: MaxProp feathering propeller Bow thruster: Yes, 7hp Charging: 140A alternator with serpentine belt, Balmar external regulator (upgraded) Any other information: Alternator and serpentine belt system upgraded from the original Yanmar V-belt arrangement
PERFORMANCE
Cruising speed: 7.5 knots Maximum speed: 8.3 knots Motor range under power: Approx. 1,000 nautical miles
TANKAGE
Fuel: 500 litres, 2 tanks, plastic Water: 1,000 litres, 4 tanks, GRP Holding tank: 80 litres, 2 tanks, plastic — fitted to two of the four heads Macerator/pump-out Grey water tank: Not fitted
ELECTRICAL
Domestic batteries: 3 x 145Ah, age September 2023 Engine starter battery: Age August 2021 Bow thruster battery: Age not recorded [CHECK] Inverter: 1,000W 110V Xantrex Battery charger: Xantrex Charging system: 140A alternator with Balmar external regulator (upgraded) Generator: Honda EU1000 portable Shore power, 14-gauge shore power cable
RIGGING
Rig type: Sloop, in-mast furling Mast material: ZSpar, keel-stepped Standing rigging: New (2026) — complete replacement of both forestays, both backstays and all shrouds, using Stay-Loc turnbuckles and swages Running rigging: New (2026) — spinnaker halyard, jib halyard and main topping lift replaced; main and jib furlers serviced Furling: In-mast main furling; furling headsail Reefing: In-mast Spinnaker pole: Original Lines led aft to cockpit: Yes
SAILS
Main: Elvstrøm, approx. 20 years old, fair condition, in-mast furling Genoa: UK Sailmakers, approx. 18 years old, good condition Cruising chute/spinnaker: North Sails, approx. 18 years old, excellent condition, fitted with a snuffer for short-handed use Sails have been regularly serviced by a sailmaker in Lefkas
Detalles
FabricanteBENETEAU
Modelo50
Año (construcción / reforma)2003
Eslora14,6m
Motores1
Potencia total100 hp
Manga4,6m
Especificaciones
Dimensiones
Eslora total14,6m
Eslora de flotación13,4m
Manga4,6m
Casco
MaterialGRP
Peso
Desplazamiento13,0 t
Propulsión
Motor 1
Marca del motorYanmar
Modelo del motor4JH3-HTE
Tipo de combustibleDiésel
Potencia100 hp
Los detalles de esta página son proporcionados por Network Yacht Brokers como material comercial. Contacta directamente con el bróker para obtener toda la información.
